Advertisement
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
• Do not load this unit with more than 30 lbs.
• Safely discard all packing material.
• Keep small parts away from children.
• The assistance of another person may be required to help install this unit.
CAUTION
Take care when moving the product and never drag the pieces across the floor as this will cause damage to the joints.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents
list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 60 minutes
ASSEMBLY INSTRUCTIONS
1.
Attach both panels (E) to the front panel (C) by inserting the
tabs on the side panel (E) into the slots on the front panel
(C) and push down until the side panel (E) slides into place.
Repeat this step for the back panel (D).
2.
Attach the base (B) to the assembled unit and twist the
locking nut clockwise to secure in place.
NOTE: For all applicable steps, ensure the direction of the
locking bolt is parallel when inserted into the nut on the panel.
Lock Nut Operation: To attach a panel with the built-in
locking nut, start by ensuring that the tab on the locking nut is
in the open position (Fig.1). By opening the tab on the locking
nut, the knob on top of the nut will be aligned with the
direction of the slot on the panel you are attaching. Slide the
knob into the slot on the second panel. Then close the tab on
the locking nut to rotate the knob, securing the two panels
together.
www.homewerksww.com
1
E
2
Fig. 1
Open
3
E
C
D
Closed
B
Advertisement
