Contents Of Kit; Installation - Riello Tau Unit Oil V70 240 Instruction Manual

v70/240 Servomotor AcceSSory
this instruction manual supplements the manual for the boiler in which this kit is installed. refer to that manual for all
generAl SAfety informAtion and precAutionS.
DESCRIPTION OF THE kIT
The V70/240 MIXER VALVE SERVOMOTOR KIT lets you control the mixer valve for a mixed zone in the same central hea-
ting system or in a separate central heating system served by the same boiler.

CONTENTS OF kIT

Description
1 - Mixer valve motor
2 - Instruction manual
The kit is packaged in a cardboard box identified by a
label bearing the name of the kit, its code and a product
bar code.

INSTALLATION

This kit must only be installed by the manufacturer's own Technical Assistance Service or by a professionally qualified
heating engineer. Before you begin the installation turn electrical power to the system 'OFF' at the mains switch.
installing the mixer vAlve motor
- Fit the cap (A) over spindle (B) and turn it to "3". Screw in the screw (C) as shown in the figure.
- Position the motor over the mixer valve, taking care to pass the screw (C) through the hole (D) in the motor body.
- Fix the motor to the mixer valve with the screw (E) and spacer (F) provided in the kit.
- Make sure that the label is arranged as shown in the figure, then fix it in place with plastic cover (G).
4
for mixer vAlve
Q.ty
Parte SMUSSATA
BEVELLED edge at
verso il basso
the bottom
Tacca verso
Pointer at the
il BASSO
BOTTOM
B
A
C
D
1
1
1
F
E
2
BLUE
BLU
RED
ROSSO
G