Advertisement
Flying-Boat: Assembly Instructions
GLUING INSTRUCTIONS
Glue the parts together in the order indicated.
Fold all tabs outward.
Aligning the noses flush,
glue
through
together
in the order shown.
Glue the sponson
of the fuselage. Glue the sponson
on the right side of the fuselage.
Fuselage
View the fuselage from the front. Before the glue dries thoroughly,
fix the sponsons
and
Assemble the sponson.
(Sponson: a projection on the side of the fuselage.)
Fold all tabs on
.
Swell the inside of the two folds of
Then spread glue on the shaded portion
as shown in the figure and glue the part
together to complete its bag shape.
Arrows point forward.
to the printed box on the left side
to the printed box
to ensure that they are glued horizontally.
.
Glue
to the upperside of
on both edges of
. When dry, cut off the protruding portions.
Placing a ruler along the dashed line on both edges
of the main wing (
to make a dihedral angle of 10˚.
Camber the main wing (
after the curve of its gluing position on the fuselage.
Glue the main wing firmly to the fuselage.
8mm approx.
(1/3")
Insert a pencil into the sponson and swell it
again to make it into a streamline shape.
- 2 -
aligning the dashed line
+
), bend the strips upward
Glue the horizontal stabilizer
to the fuselage.
Arrow points forward.
+
)
Assemble part
in the same manner.
Advertisement
