Know Your Lawn Mower - White Outdoor 950-959 Series Operator's Manual

Step 6. Tighten the cable ties and insert pegs on ties in lower handle holes. Cut off excess.
Step 7. Loosen the wing nut holding the rope guide to the upper handle.
Step 8. Squeeze the blade control handle against the upper handle and pull out starter rope slowly.
Step 9. Thread starter rope into rope guide.
Step 10. Tighten wing nut.
Look here
for rope
guide placement
• Your mower has been shipped in the lowest cutting position for shipping purposes. Please see the "cutting
height adjustment lever" section on page 10 of this owner's guide to adjust cutting height.
SECTION 5: KNOW YOUR LAWN MOWER
Blade Control Handle
Drive Clutch Control
*Model 959 - adjusts all 4 wheels
Model 969 - adjusts rear wheels only
Blade Control Handle
Upper Handle
Shift Lever
Recoil Starter
Figure 5
Here
Starter Rope
Rope Guide
Cutting Height
Adjustment Lever*
9
Wing Nut
Front Wheel
Caster Locks
(969 only)
Front Wheel
Height Adjuster
(969 only)