1. Manuals
  2. Brands
  3. Titan Pro Manuals
  4. Log Splitter
  5. TPLS11TV
  6. Operator's manual

Titan Pro TPLS11TV Operator's Manual

Hydraulic log splitter
Hide thumbs Also See for TPLS11TV:
Table of Contents

Advertisement

Quick Links

Download this manual
Save This Manual for Future Reference
Original Instruction
Hydraulic Log Splitter
Operator's Manual
MODEL NUMBER:
TPLS11TV
SERIAL NUMBER
:
Both model number and serial number may be found on the main label.
You should record both of them in a safe place for future use.
FOR YOUR SAFETY
READ AND UNDERSTAND THE ENTIRE MANUAL BEFORE OPERATING
MACHINE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TPLS11TV and is the answer not in the manual?

Questions and answers

Related Manuals for Titan Pro TPLS11TV

Summary of Contents for Titan Pro TPLS11TV

  • Page 1 Original Instruction Hydraulic Log Splitter Operator's Manual MODEL NUMBER: TPLS11TV SERIAL NUMBER Both model number and serial number may be found on the main label. You should record both of them in a safe place for future use. FOR YOUR SAFETY...

  • Page 2: Table Of Contents

    Certificate of Conformity Wear protective gloves! Wear eye protection! INTRODUCTION Wear hearing protection! Your new Titan Pro 11 ton log splitter has been designed to more than satisfy your expectations, Keep your work space following in our long line of quality tidy! Untidiness may garden machinery products.

  • Page 3: Safety

    Do not remove jammed logs Do not use the log splitter in wet or with your hands. damp areas, or expose it to rain. Do not use it in areas where fumes from paint, solvents or flammable liquids pose a Caution! Thrown objects.
  • Page 4 AVOID ELECTRICAL SHOCK DON'T OVERREACH Keep proper footing and balance at C h e c k t h a t t h e e l e c t r i c c i r c u i t i s all times.

  • Page 5: Specifications

    MAKE THE WORKSHOP CHILDPROOF Lock your w o r k shop. Store the log splitter away from children and others not qualified to use it. Specifications TPLS11TV Model Number Motor (S6 40%)* 230V~ 50Hz 3000W 13A 10-30 cm Dia.

  • Page 6: Contents Supplied

    APPLICATION CONDITIONS ELECTRICAL REQUIREMENTS This log splitter is d esigned for operation With a 230 Volt / 50Hz motor, the log und er ambient temperatures between +5°C splitter should be connected to stand ard and 40°C and for installation at altitud es no 230V ±...

  • Page 7: Assembly

    3. Release both control handles to ASSEMBLY retract the wedge ram. Remove the support stand. 1. Insert the wheel axle into the holes of the mount bracket. Slide the wheels onto the axle and secure with Ø2x20 split pins from outside. Attach the wheel caps.

  • Page 8: Transport

    5. Position the retaining hook onto the TRANSPORT frame and secure with two M10×30 Pull the spring pin and slide the square hex bolts and nuts. tube of the support wheel into the holder. Loosen the spring pin to fix it after selecting the appropriate hole.

  • Page 9: Deliverying Log Splitter To Work Site

    MOVING THE LOG SPLITTER TO THE WORK SITE The log splitter is equipped with 2 wheels for moving. To move the log splitter, grip the handle (a) to tilt the log splitter slightly after making sure the oil tank cover is tightened. Bleed the air out of the hydraulic system before starting the log splitter.
  • Page 10 3. Return the splitter wedge to the starting position. Operate the spring-loaded retract control lever to lift the wedge above the height of log to be split. Reverse Control Handle 2. Hold the left press lever. Meanwhile, move the splitter wedge down by pressing the right splitting lever to half stroke to split the log...

  • Page 11: Free A Jammed Log

    It can be shifted by simply raising and Titan Pro ISO32 Hydraulic Oil lowering the splitting lever slightly. SHELL Tellus 22 MOBIL DTE 11 Do not attempt to split green ARAL Vitam GF 22 l o g s .

  • Page 12: Sharpening Wedge

    Use a drain pan to aid in the removal of SHARPENING WEDGE all used oil and particles. Remove the oil drain plug to drain oil This splitter equipped from the hydraulic transmission with a reinforced splitting wedge with system. E x a m i n e o i l f o r m e t a l...

  • Page 13: Troubleshooting

    TROUBLESHOOTING PROBLEM PROBABLE CAUSE REMEDY SUGGESTED Turn the switch ON Motor does not start Switch is OFF Valve is not opening Check and tighten the owing to the connecting parts parts being loose Log splitter does not work Control levers or Repair the bent parts while the motor is running connection parts bent...

  • Page 14: Parts Schematic

    PARTS SCHEMATIC...
  • Page 15 Parts List Description Q'ty Description Q'ty Left Guard Bracket 34 Locknut M8 Bolt 8.8 M10x30 35 Large Washer 8 Flat Washer 10 36 Wing Bolt M8x25 Locating Pin Handle 37 Bolt M8x20 Locknut M10 38 Lower Hose Lift Chain Φ6 39 Combined Washer 20 Wedge Weldment 40 Upper Hose...
  • Page 16 Description Q'ty Description Q'ty 67 Connectin Lever Screw Plug 68 Bolt 8.8 M8x40 92 Combined Washer 22 69 Cylindrical Pin 6x40 93 Main Frame 70 Stroke Adjusting Lever 94 Bolt 8.8 M6x12 Round Plate 95 Flat Washer 6 72 Clip 2.5 96 Buffer Spring 73 Large Washer 10 97 O- Ring 50x2.65...

  • Page 17: Certificate Of Conformity

    Standards and technical specifications referred to: EN 609-1:2017 EN 55014-1:2017 EN 55014-2:2015 EN 61000-3-2:2014 EN 61000-3-11:2000 Authorised Signature Date: 19/01/2019 Name/Title: Mr Charlie Abbott – Sales Director Titan Pro Ltd, Unit 11 Glenmore Business Park, Wend-Al Road, Blandford Forum, Dorset, DT11 7FP...

Table of Contents