Applicable Models; Safety Instructions - Makita WST06 Instruction Manual

ENGLISH (Original instructions)
ENGLISH

Applicable models

This stand is applicable to Makita miter saws EXCEPT FOR the following models:
DLS600, LH1040/F, LH1201FL
Symbols
Take particular care and attention.
Read instruction manual.
Maximum allowable loading
MAX.
xxx Kg
(xxx lbs.)

Safety instructions

CAUTION:
• Read and thoroughly understand this manual and the instruction manual of your miter saw before use.
• Before installing a miter saw on this stand, always switch off and unplug or remove the battery
cartridge(s).
• Use this stand only with the applicable Makita miter saws.
Always use the stand with its legs extended and locked.
•
• Before operating the miter saw, be sure to secure the miter saw to the stand using bolts.
• Before operating the miter saw, make sure that the miter saw is secured to the stand by the lock.
• Do not use the stand on uneven or unstable surface.
• Do not climb, sit or stand on the stand.
When storing miter saw stand, never lean it against the wall or the like lengthwise or sideways.
•
• Remove the miter saw when transporting the stand.
• Be careful not to pinch your finger when grabbing the lever to detach the miter saw from the stand.
7 ENGLISH