Basalte ASANO A4 Installation Manual page 2

ASANO A4
Installation Manual
How to install
1
- Power supply (1)
The Asano A4 has to be powered by a Euro mains power lead with a 230V AC input.
Do not unplug the connector at this side with voltage present.
- Audio Network (3)
Connect Asano A4 to the audio network using Ethernet CAT5e cable. The network has to be a dedicated network
separated from your local data network.
- Inputs (4)
Additional sources can be connected to the 3 analogue inputs.
- Trigger output (5)
Each zone has a seperate trigger output to switch on and of the amplifier or active speaker.
- Loudspeaker outputs (6)
The 4 analogue zones are connected with RCA connectors.
Technical data
Power: 220V - 240 V AC
Power consumption: 5W
Analogue input sensitivity: 2V RMS
Ambient temperature:
Operation: -5°C to 45°C
Storage: -15°C to 55°C
Transport: -15°C to 55°C
3
2
basalte bvba | hundelgemsesteenweg 1A | 9820 merelbeke | belgium
t +32 (0)9 385 78 38 | f +32 (0)9 329 66 95 | www.basalte.be | info@basalte.be
4a 4b 4c 5a
+ - + -
+ - + -
5b
Dimensions: w 330 x h 50 x d 180 mm
Weight: 1,5 kg
Max. humidity: 93% relative humidity,
no moisture condensation
Protection class: II
Type of protection: IP 20
Certification: CE
6a 6b 6c 6d