Memory/Beep Confirmation; Audio Level Adjustment - Whistler 1780 Owner's Manual

1780 10/4/00 9:26 AM Page 13
OPERATION

Memory/Beep Confirmation

All features selected (except Stay Alert and Quiet) are
retained in memory. Each time a button is pressed one
beep confirms feature "on", two beeps confirm feature
"off".

Audio Level Adjustment

The audio levels can be adjusted high to low, or low to
high, in nine steps: (0) is no audio level, (8) the highest.
• Press Volume up to increase audio level.
• Press Volume down to decrease audio level.
As audio level is adjusted, beeps are provided and the dis-
play indicates volume level. Example:
VOL
No Audio Level
VOL
Highest Level 8
10
O
8
OPERATION
Auto Quiet Mode
Auto Quiet reduces the selected audio level to level (1)
approximately 5 seconds after a radar or safety radar sig-
nal is detected. The alert for any new signal within 20 sec-
onds will resume at level (1). Auto Quiet does not affect
VG-2 or laser alerts.
• Press Quiet/Menu (before a signal is detected) to
engage Auto Quiet. Display reads:
AUTO
QUIET
• Once the Auto Quiet mode is engaged, you may cancel
the audio alarm by pressing Quiet.
• Press Quiet (when the unit is not alarming) to cancel
Auto Quiet mode.
Quiet Mode
Quiet cancels audio during an alert and any new alert with-
in 20 seconds. After 20 seconds, approximately 2 beeps
are provided on any new alert and unit then remains quiet.
• Press Quiet to cancel the audio.
• Press Quiet a second time during an alert to restore the
standard audio alert pattern; or turn the unit off, then on.
11