Velleman MP25FMU Manual page 2

Overview
1 M button
2 LED light
3 USB port
4 SD card slot
5 previous/volume down
7. Operation
Using the Speak function
Warning: Never point the cone directly to people or animals at close
distance (<10m); temporary or permanent ear damage may occur.
1. Place the mode switch in the SPEAK position.
2. Point the cone towards the audience.
Take the microphone and press and hold the speak button, then
speak in the microphone.
You can also press and push the speak button upward to lock it
in the speak position.
Note: the closer the sound source to the microphone, the better
the sound.
3. Adjust the volume if necessary: turn the volume control wheel
upward to increase the volume. Turn it downward to decrease
the volume.
4. Release the speak button to end broadcast.
Using the Siren function
1. Place the mode switch in the SIREN position.
2. Point the cone towards the audience.
3. Press the trigger to sound the siren.
4. Release the trigger to end.
Playing a sound file from a USB stick or SD card
1. Place the mode switch in the USB/SD position.
The LED indicator lights up when using a device with usb, sd
card or aux.
2. Connect a USB stick or an SD card to the device.
You can also connect a device through the AUX input.
3. Press the M button to select the source.
4. Press the play button to play the file.
V. 01 – 29/01/2013
MP25FMU
6 play/pause
7 next/volume up
8 Auxiliary input (AUX)
9 mode switch
2 ©Velleman nv