U-Line H-5226 Quick Start Manual
U-Line H-5226 Quick Start Manual

U-Line H-5226 Quick Start Manual

Temperature gun

Advertisement

Quick Links

π
H-5226
TEMPERATURE GUN
WARNING! Read all safety warnings and
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire
and serious injury. Save these instructions, as
they contain important safety and operating
instructions. Before using, read this manual and
all labels on the temperature gun thoroughly.
LASER LIGHT
• Do not stare into beam or view directly with optical
instruments. Do not point laser light at others. Laser
light can cause eye damage.
• Avoid exposure to laser radiation. Laser may emit
hazardous radiation.
• Do not point laser at reflective surfaces.
Unpredictable results may occur.
WORK AREA
• Keep children and bystanders away while operating
temperature gun. Store idle temperature gun out
of the reach of children and do not allow persons
unfamiliar with the tool or these instructions to
operate them.
• Avoid dangerous environments. Do not use in rainy,
snowy, damp or wet locations. Do not use in the
presence of explosive atmospheres (i.e., gaseous
fumes, dust or flammable materials) because sparks
may be generated when inserting or removing
batteries, possibly causing fire.
PERSONAL
• Stay alert, watch what you are doing and use
common sense when operating temperature gun.
Do not use while you are tired or under the influence
of alcohol or medication. A moment of inattention
may result in serious personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control in
unexpected situations.
PAGE 1 OF 4
1-800-295-5510
uline.com

SAFETY

BATTERY USE AND CARE
• This tool is designed to be powered by three AA
batteries properly inserted into the temperature
gun. Do not attempt to use with any other voltage or
power supply.
• Do not leave batteries within reach of children.
• Do not mix new and used batteries. Do not mix
brands (or types within brands) of batteries.
• Do not mix rechargeable and non-rechargeable
batteries.
• Install batteries according to polarity (+/–) diagrams.
• Properly dispose of used batteries immediately.
• Do not incinerate or dismantle batteries.
• Under abusive conditions, liquid may be ejected
from the battery – avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, seek medical help. Liquid ejected
from battery may cause irritation or burns.
SERVICE
• Have your temperature gun serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the tool is
maintained.
• Do not disassemble. Incorrect reassembly may result
in the risk of electric shock or fire. If damaged, call
Uline Customer Service at 1-800-295-5510.
• Store in a cool, dry place. Do not store where
temperatures may exceed 140°F (60°C), such as in
direct sunlight, a vehicle or a metal building during
the summer.
• Do not remove or deface labels. Maintain labels
and nameplates. These carry important information.
If unreadable or missing, contact Uline Customer
Service at 1-800-295-5510.
0515 IH-5226

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H-5226 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for U-Line H-5226

  • Page 1 π H-5226 1-800-295-5510 uline.com TEMPERATURE GUN SAFETY BATTERY USE AND CARE WARNING! Read all safety warnings and instructions. Failure to follow the warnings and • This tool is designed to be powered by three AA instructions may result in electric shock, fire batteries properly inserted into the temperature and serious injury.
  • Page 2 DIAGRAM SPECIFICATIONS DESCRIPTION Laser Type Class II Laser Window Max Power <1mW Infrared Sensor Wavelength 630-670 nm Nameplate IR Temperature Range -22°F to 662°F Trigger IR Accuracy -22°F to 50°F: ±3°F + 0.2°F/2°F Display 50°F to 248°F: ± 3°F or ± 1.5% of reading, whichever is greater Alarm Button 248°F to 662°F ±...
  • Page 3 ASSEMBLY LOADING/CHANGING THE BATTERIES Figure 1 Press in the battery door lock and open the battery door. 2. Before installing batteries for the first time, remove the white, rectangular tag in the battery compartment. 3. Insert three AA batteries. (See Figure 1) 4.
  • Page 4 MAINTENANCE CLEANING WARNING! To reduce the risk of injury, always remove the batteries from the tool • Clean dust and debris from tool. before performing any maintenance. Never disassemble the tool. Contact Uline Customer • Keep tool handle clean, dry and free of oil or Service at 1-800-295-5510 for all repairs.

Table of Contents