U-Line H-5802 Manual
U-Line H-5802 Manual

U-Line H-5802 Manual

Temperature gun
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

π
H-5802
TEMPERATURE GUN
WARNING! Read all safety warnings and
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire
and serious injury. Save these instructions, as
they contain important safety and operating
instructions. Before using, read this manual and
all labels on the temperature gun thoroughly.
LASER LIGHT
• Do not stare into beam or view directly with optical
instruments. Do not point laser light at others. Laser
light can cause eye damage.
• Avoid exposure to laser radiation. Laser may emit
hazardous radiation.
• Do not point laser at reflective surfaces.
Unpredictable results may occur.
WORK AREA
• Keep children and bystanders away while operating
temperature gun. Store idle temperature gun out
of the reach of children, and do not allow persons
unfamiliar with the tool or these instructions to
operate the temperature gun.
• Avoid dangerous environments. Do not use in rainy,
snowy, damp or wet locations. Do not use in the
presence of explosive atmospheres (i.e., gaseous
fumes, dust or flammable materials) because sparks
may be generated when inserting or removing
battery, possibly causing fire.
PERSONAL
• Stay alert, watch what you are doing and use
common sense when operating temperature gun.
Do not use while you are tired or under the influence
of alcohol or medication. A moment of inattention
may result in serious personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control in
unexpected situations.
PAGE 1 OF 12
1-800-295-5510
uline.com
SAFETY
BATTERY USE AND CARE
• This tool is designed to be powered by one 9V
• Do not leave battery within reach of children.
• Install battery according to polarity (+/–) diagrams.
• Properly dispose of used battery immediately.
• Do not incinerate or dismantle battery.
• Under abusive conditions, liquid may be ejected
SERVICE
• Have your temperature gun serviced by a qualified
• Do not disassemble. Incorrect reassembly may result
• Store in a cool, dry place. Do not store where
• Do not remove or deface labels. Maintain labels
Pour le français, consulter les pages 9-12.
battery properly inserted into the temperature gun.
Do not attempt to use with any other voltage or
power supply.
from the battery – avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, seek medical help. Liquid ejected
from battery may cause irritation or burns.
repair person using only identical replacement
parts. This will ensure that the safety of the tool is
maintained.
in the risk of electric shock or fire. If damaged, call
Uline Customer Service at 1-800-295-5510.
temperatures may exceed 140°F (60°C), such as in
direct sunlight, a vehicle or a metal building during
the summer.
and nameplates. These carry important information.
If unreadable or missing, contact Uline Customer
Service at 1-800-295-5510.
Para Español, vea páginas 5-8.
0516 IH-5802

Advertisement

Table of Contents
loading

Summary of Contents for U-Line H-5802

  • Page 1 Para Español, vea páginas 5-8. Pour le français, consulter les pages 9-12. π H-5802 1-800-295-5510 uline.com TEMPERATURE GUN SAFETY BATTERY USE AND CARE WARNING! Read all safety warnings and instructions. Failure to follow the warnings and • This tool is designed to be powered by one 9V instructions may result in electric shock, fire battery properly inserted into the temperature gun.
  • Page 2: Specifications

    DIAGRAM HOLD SPECIFICATIONS DESCRIPTION Laser Type Class II Laser Window Max Power <1mW Trigger Wavelength 630-670 nm Display IR Temperature Range -22° to 752°F Mode/Set/Alarm Buttons IR Accuracy -22° to 0°F: ± 4°F + 0.2°/2°F Battery Door Lock Battery Door 0°...
  • Page 3: Operation

    ASSEMBLY LOADING/CHANGING THE BATTERY SELECTING CELSIUS OR FAHRENHEIT Using a flathead screwdriver, rotate the battery To set the temperature scale, pull the trigger, then press door lock to the unlocked position and the SET button three times. Press the buttons above the open the battery door.
  • Page 4: Maintenance

    MAINTENANCE WARNING! To reduce the risk of injury, CLEANING always remove the battery from the tool • Clean dust and debris from tool. before performing any maintenance. Never disassemble the tool. Contact Uline Customer • Keep tool handle clean, dry and free of oil or Service at 1-800-295-5510 for all repairs.
  • Page 5: Área De Trabajo

    π H-5802 800-295-5510 uline.mx PISTOLA DE TEMPERATURA SEGURIDAD USO Y CUIDADO DE LA BATERÍA ¡ADVERTENCIA! Lea todas las instrucciones y advertencias de seguridad. No seguir las • Esta herramienta ha sido diseñada para funcionar advertencias y las instrucciones podría ocasionar con una batería de 9 V correctamente insertada en la...
  • Page 6: Especificaciones

    DIAGRAMA HOLD ESPECIFICACIONES DESCRIPCIÓN Tipo de Láser Clase II Ventana Láser Potencia Máx. <1mW Gatillo Longitud de Onda 630-670 nm Pantalla Rango de temperatura IR -30 ° a 400 °C (-22 °F a 752 °F) Botones de Modo/ Configuración/Alarma Precisión IR -30 °...
  • Page 7 ENSAMBLE CARGAR/CAMBIAR LA BATERÍA SELECCIONAR GRADOS CELSIO O FAHRENHEIT 1. Con un desarmador plano, gire el seguro de Para configurar la escala de temperatura, jale del gatillo la puerta de la batería hacia la posición de y presione el botón SET tres veces. Presione los botones abierta y abra la puerta de la batería.
  • Page 8: Mantenimiento De La Herramienta

    MANTENIMIENTO ¡ADVERTENCIA! Para reducir el riesgo de LIMPIEZA lesiones, siempre quite la batería de la • Limpie todo el polvo y la suciedad de la herramienta antes de darle mantenimiento. herramienta. No desensamble nunca la herramienta. Comuníquese con Servicio a Clientes de Uline •...
  • Page 9 π H-5802 1-800-295-5510 uline.ca PISTOLET À INFRAROUGE SÉCURITÉ UTILISATION ET ENTRETIEN DES PILES AVERTISSEMENT! Lisez l'ensemble des avertissements ARRÊT et consignes de sécurité. Le défaut de suivre les • Cet outil est conçu pour être alimenté par une avertissements et instructions pourrait entraîner une pile de 9 V correctement insérée dans le pistolet à...
  • Page 10: Spécifications

    SCHÉMA HOLD SPÉCIFICATIONS DESCRIPTION Type de laser Classe II Fenêtre du laser Puissance maximale <1 mW Détente Longueur d'onde 630 à 670 nm Écran d'affichage Plage de température de -30 ° à 400 °C (-22 ° à 752 °F) Touches « Mode/Set/Alarm » l'infrarouge (mode/réglage/alarme) Précision de l'infrarouge -30 °...
  • Page 11: Montage

    MONTAGE INSTALLATION/CHANGEMENT DE LA PILE CHOISIR CELSIUS OU FAHRENHEIT Pour définir les plages de température, maintenez la 1. À l'aide d'un tournevis à tête plate, tournez le détente enfoncée et appuyez sur la touche SET à trois verrou du compartiment à pile en position reprises.
  • Page 12: Entretien De L'outil

    ENTRETIEN AVERTISSEMENT! Pour réduire le risque de NETTOYAGE ARRÊT blessures, retirez toujours la pile avant toute • Enlevez la poussière et les débris de l'outil. opération d'entretien. Ne démontez jamais l'outil. Pour toute réparation, communiquez • Gardez le manche de l'outil propre, sec et exempt avec le service à...

Table of Contents