Safety Safety, performance, and dependability have been given electric shock. top priority in the design of your cut-off machine. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. INTENDED USE Keep cord away from heat, oil, sharp edges or moving parts.
Safety designed. intended for peripheral grinding, side forces applied to these wheels may cause them to shatter. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled Always use undamaged wheel flanges that are of with the switch is dangerous and must be repaired.
Safety stalling of the rotating wheel which in turn causes the fitted and tightened before use and run the machine at uncontrolled cutting unit to be forced upwards toward no-load for 30 seconds in a safe position, and to stop the operator.
41--- abrasive type, flat cutting-off wheel of 30mA or less. A --- abrasive material: brown corundum RYOBI recommends that you use Metal cutting Disc 24 --- grain size COSB355A1 as a replacement whenever you need a R --- grade or hardness new disc.
Safety 6. Cutting depth lock nut WARNING 7. Mitre guide For greater safety and reliability, all repairs should be 8. Wrench performed by an authorised service centre. 9. Upper guard 10. Lower guard 11. Cutting wheel 12. Work clamp ENVIRONMENTAL PROTECTION 13.
Safety locations. Cutting-off wheel rotation direction (shown on wheel guard) Waste electrical products should not be disposed of with household waste. Please Local Authority or retailer for recycling advice. SYMBOLS IN THIS MANUAL Lock Unlock Waiting time for blade to reach full speed Parts or accessories sold separately Note Warning...
PRODUCT SPECIFICATIONS Measured values determined according to EN 62841 Cut-off machine A-weighted sound pressure level = 91.5 dB(A) Model RCO2300 Uncertainty K 3 dB(A) Net weight 17.5 kg Measured values Wheel type Type 41 reinforced abrasive wheel determined according to...
Page 28
Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC, 3149, Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand RYOBI is a trademark of Ryobi Limited, and is used under license. 20190719v1...