Page 1
Quick install guide Version 1.0 Check package contents Flexor 500 Body Handset Handset Cable Ethernet Cable Power Supply VoiceConnect CD...
Page 2
Optional. If your PC has an Ethernet connection to your local area network (LAN), unplug the end of the cable connected to your switch, router or hub and connect this to the PC port of the Flexor 500 base. Connect the power connector to the Flexor 500 base and plug in the power adaptor to a suitable wall...
Page 3
Show main menu Show address book Show IP address When the Flexor 500 starts up it carries out a series The Flexor 500 is likely supplied by your vendor of checks for networking and finally that there is a pre-configured for a VoIP service. Once the Flexor 500 SIP (VoIP) account configured.