Advertisement
(Primary Counting Sensor)
• Blow compressed air in and around sensor area with feed in
"Closed" position
• Insert Q-Tip through "U" shaped access holes to clean surface of
clear prism.
• Clean sensor faces with Q-tip. The Q-tip will clean the prism surface
after being inserted 1½" on left and 2
when pulling out to prevent cotton from being pulled off tip
Viewed
with Bill
Dispenser
upside
down
Q-Tip
shown
inserted
PS1 Sensor
Viewed with
Bill
Dispenser
Cassette
removed
Photo sensor
with Prism
1
/
" on right. Rotate Q-Tip
4
Advertisement
