Advertisement
INSTALLATION STEPS
Step 1 − Swing panel may be hinged on any
side. Determine mounting position desired and
drill eight .312 (8mm) diameter holes as shown
on page 6.
Step 2 − Mount hinges and securing brackets
using pan head screws with nylon washers un-
der the screw heads. In order to meet NEMA 4
and NEMA 12 standards, nylon washers must
be used.
Step 3 − Mount swing panel to hinges with 3/8"
hex head bolts, lockwashers, and hex nuts. Ad-
just panel until panel swings freely through the
door opening.
Step 4 − Captivate thumb screws to panel using
retaining rings provided.
Step 5 − On larger enclosures or with heavy
panel loading, be sure to drill two holes in swing
panel and install two bolts per hinge as shown.
− 4 −
E 2006 Hoffman Enclosures Inc.
RSPSupply - 1-888-532-2706 - www.RSPSuppl
http://www.RSPSupply.com/p-7425-Hoffman-ANA
87568919
Advertisement
