Maintenance; Register Online - DeWalt DW0881 Instruction Manual

Adjusting the Leg Height
1. Release the quick-adjust latch (B) of the first leg (C) to set the
desired height. Tighten the latch.
2. Repeat process for the other legs.
Mounting the Laser to the Tripod
The Tripod has been equipped with a threaded pin for mounting of
any DEWALT Laser Product with ¼" thread.
1. Install the tripod on a relatively smooth and level surface, using
the bubble level (J) as a guide.
2. Mount the laser to the tripod by turning the mounting thread (F)
into the receptacle in the base of the laser.
WARNING: Before mounting a laser to the tripod, check that the
legs are firmly set and that the tripod is wobble free.
Elevating the Head Mount
The head mount (A) can be elevated to a maximum height of 5 1/2
feet. The laser is operated using the elevator crank handle (D). Move
the head mount to the desired height and tighten the elevating lock
knob (I).
Storage
In order to conveniently store the attachment, a carrying bag is
included.

MAINTENANCE

Accessories
WARNING: Since accessories, other than those offered by
D WALT, have not been tested with this product, use of such
e
accessories with this tool could be hazardous. To reduce the risk of
injury, only D WALT recommended accessories should be used with
e
this product.
Recommended accessories for use with your tool are available at
extra cost from your local service center. If you need any assistance
in locating any accessory, please contact DEWALT Industrial Tool Co.
701 East Joppa Road Towson, MD 21286 1-800-4-DEWALT (1-800-433-9258)

Register Online

Thank you for your purchase. Register your product now for:
• WARRANTY SERVICE: Registering your product will help you
obtain more efficient warranty service in case there is a problem
with your product.
• CONFIRMATION OF OWNERSHIP: In case of an insurance
loss, such as fire, flood or theft, your registration of ownership
will serve as your proof of purchase.
• FOR YOUR SAFETY: Registering your product will allow us to
contact you in the unlikely event a safety notification is required
under the Federal Consumer Safety Act.
Register online at www.dewalt.com/register.
Three Year Limited Warranty
D WALT will repair, without charge, any defects due to faulty materials or
e
workmanship for three years from the date of purchase. Please return the
complete unit, transportation prepaid, to any D
any authorised service station.
For warranty repair information contact D
East Joppa Road, Baltimore, MD 21286, call 1-800-4-D
433-9258) or visit our website: www.dewalt.com.
This warranty does not apply where
• Damage is caused by repairs which have been made or
attempted by others.
• Damage is due to misuse, neglect, wear and tear, alteration or
modification.
2
WALT Service Centre, or
e
WALT Industrial Tool Co., 701
e
WALT (1-800-
e