Fujitsu ASYG09KMCB Design & Technical Manual page 30

¢ Contents of function setting
Each function setting listed in this section is adjustable in accordance with the installation environ-
ment.
NOTE: Setting will not be changed if invalid numbers or setting values are selected.
 Function setting list
Function no.
1) 11
2) 30
3) 31
4) 40
5) 42
6) 44
7) 46
8) 48
9) 49
1) Filter sign
Select appropriate intervals for displaying the filter sign on the indoor unit according to the estimated
amount of dust in the air of the room.
If the indication is not required, select "No indication" (03).
Function number
11
2) Room temperature sensor control for cooling
Depending on the installed environment, correction of the room temperature sensor may be re-
quired. Select the appropriate control setting according to the installed environment.
Function number
30
3) Room temperature sensor control for heating
Depending on the installed environment, correction of the room temperature sensor may be re-
quired. Select the appropriate control setting according to the installed environment.
Function number
31
11-1. Function settings by using remote controller
Filter sign
Room temperature sensor control for cooling
Room temperature sensor control for heating
Auto restart
Room temperature sensor switching
Remote controller custom code
External input control
Room temperature sensor switching (Aux.)
Indoor unit fan control for energy saving for cooling
Setting value
00
01
02
03
Setting value
00
01
02
03
Setting value
00
01
02
03
Functions
Setting description
Standard (400 hours)
Long interval (1,000 hours)
Short interval (200 hours)
No indication
Setting description
Standard
Slightly lower control
Lower control
Higher control
Setting description
Standard
Lower control
Slightly higher control
Higher control
- 26 -
Factory setting
♦
Factory setting
♦
Factory setting
♦
11. Function settings