Advertisement
1
Q 20°
3
4/4
Eaton Industries GmbH, Hein-Moeller-Straße 7-11, 53115 Bonn, Germany
© 2008 by Eaton Industries GmbH,
www.eaton.eu/documentation
Per the intent of NFPA 79, Electrical Standard for Industrial
Machinery, the Supplementary Handle enables the Supply
Circuit Disconnecting Means to remain operable at all times
by qualified persons, independent of the door position and
without the use of accessory tools or devices.
In addition, use of the handle to close the disconnecting means
is prevented when the door is open, unless an interlock is operated
by deliberate action.
Deliberate Action to close Disconnecting Means:
Turn handle counter-clockwise appr. 20° as shown.
From this position, push the handle in to engage
shaft, then turn counter-clockwise to ON to close switch.
To open Disconnecting Means:
Turn handle clockwise from ON to OFF.
(No deliberate action necessary when going from ON to OFF).
2
Emergency On Call Service: Local representative (www.eaton.eu/aftersales) or +49 (0) 180 5 223822 (de, en)
All Rights Reserved
Warning! Danger to Life!
Operation of the Supplementary Handle may cause
circuits inside panel to become energized and create
a potentially hazardous condition. Operation to be
carried out by Qualified Persons only!
02/15 IL01219016Z
Printed in Germany (03/15)
DE05
DHW
Advertisement
