Adding Liquid Fabric Softener - Whirlpool LSC9355DQ0 Use And Care Manual

Adding liquid fabric softener
No fabric softener dispenser installed
l
Always dilute fabric softeners with 'I$ cup
l
Too much fabric softener can make some
(125 mL) to 1 cup (250 mL) warm water.
items (diapers and towels) nonabsorbent.
Undiluted fabric softener can stain fabrics.
If this happens, use less fabric softener, or
l
Add diluted fabric softener only in the final
do not use it every time.
rinse.
l
Fabric softeners should not be mixed with
other laundry products because greasy
stains may form. If stains form, remove by
wetting the stain and rubbing with liquid
detergent or a bar of soap. Rewash the
stained item.
Fabric softener dispenser installed
NOTE:
Your washer does not come with a
liquid fabric softener dispenser installed. The
dispenser is available with a mail-in coupon
packed with your washer.
1.
Add detergent and load clothes into the
basket.
2. Pour liquid fabric softener into the dis-
penser using the amount recommended
on the package. Avoid dripping or spilling
any fabric softener on the load.
3. Dilute fabric softener with warm water.
Fill dispenser with warm water until liquid
reaches the cross bar in the opening.
4. Start the washer. Diluted fabric softener will
be added to the load during the final rinse.
NOTE:
Do not stop the washer before the
rinse part of the cycle begins. Staining
can occur.
5. Flush dispenser periiically with warm
water, as illustrated.
l
To remove the dispenser, grasp the top
of the dispenser with both hands.
Squeeze and push upward with thumbs
to remove.
l
Clean dispenser by holding under water
faucet. Replace after cleaning.
NOTE:
Do not wash clothes with this
dispenser removed. Do not add detergent
or bleach to dispenser. The dispenser is
for liquid fabric softener use only.
12