Whirlpool LSE9355BQ0 Use And Care Manual page 10

O P E R AT I NG YO U R WA SH ER
To select more than a
4-hour delay:
Press TIME SELECT until the light glows by
the number of hours of delay desired. You can
select 4 to 14 hours.
To cancel a delay:
Press and hold START/DELAY longer than
5 seconds. The Delay Hours light will go off.
NOTES:
• The delay countdown starts immediately.
The selected wash cycle starts at the end of
the delay.
• When delaying a cycle, best washing results
are achieved by using your detergent
dispenser.
Selecting a load size
You can change the Load Size anytime during
the wash cycle. Your washer will change to the
new load size immediately, or at the next fill
(depending upon whether you selected a larger
or smaller load size).
To change the preset load size:
1. Press LOAD SIZE SELECT
until the light glows by the load size
you desire.
2. Make other selections, if
desired, and press START.
Load size tips
• Items should move freely in the washer.
Do not overload the machine or select a
load size that is too small for the wash load.
10
PRESS
Select
PRESS
AND HOLD
Start
Delay
PRESS
Select
PRESS
Start
Delay
•
Use a large load size setting for best results
with permanent press clothes.
• Reduce wash time when using a small load
size setting. Loads with only a few small
items need less wash time.
Time
14
Heavy
12
10
Normal
8
6
Light
4
Time
14
Heavy
12
10
Normal
8
6
Light
4
Delay Hours
Load Size
Extra Large
Medium
Small