Advertisement
15
Once all devices are installed, open the profile assignment screen
and click Next. This will bring you to the Mesh Formation Screen.
16
On the Mesh Formation screen, select the profile from the Select a
Gateway in Range table.
9
For security purposes, you will be prompted for a password. If
17
your gateway is unlocked, a Lock Gateway prompt will display.
Conversely, if your gateway is unlocked, an Unlock Gateway
prompt will display. Enter the gateway password and click OK.
When the correct password is entered, a Hall Sensor Activation
18
window will display. You will then have 120 seconds to place a
magnet on the gateway sensors to unlock the device.
Advertisement
