Advertisement
Quick Links
Assembly Instructions
Quick
Flex Bar
Parts List
(2) Brackets
(2) PTO Pins
Parts List
(2) Brackets
(2) PTO Pins
(2) Bar Pads
(1) Bar Strap
(1) Bag
Thank you for purchasing
the Quick Flex Bar to be
used with the original Tumbl
Trak™. This product is not
designed to be used with
other tumbling tracks or
trampolines. We hope you
will enjoy years of use of
this product.
After opening the boxes,
please check the parts list to
make sure all pieces have
arrived in good condition. If
you have any questions
during this assembly
process, please call
customer service
at 1-800-331-4362.
(2) Bar Pads
(1) Bag to hold everything
Any questions or problems, please call Tumbl Trak at (800) 331-4362
(1) Bar Strap
with Ratchet
NOTE: Tumbl Trak equipment is not recommended for
the use in Parkour/Free Running related activities.
Advertisement
Related Manuals for Tumbl Trak Quick Flex Bar
Summary of Contents for Tumbl Trak Quick Flex Bar
- Page 1 Parts List (2) Brackets (2) PTO Pins (2) Bar Pads (1) Bar Strap (1) Bag NOTE: Tumbl Trak equipment is not recommended for the use in Parkour/Free Running related activities. Any questions or problems, please call Tumbl Trak at (800) 331-4362...
- Page 2 Close the hinge and replace the PTO pin into the hole. Begin to tighten the ratchet. You will want to push down on the bracket to make sure it is tight to the Tumbl Trak. Step Tighten the ratchet as tight as you can. You will then want to bounce on the strap a few times and tighten again.
Need help?
Do you have a question about the Quick Flex Bar and is the answer not in the manual?
Questions and answers