Chapter 3 Basics; Introduction; Switching On/Rebooting/Switching Off The M10 - Newland CL-M10 User Manual

Introduction

This chapter provides the basics of setting and using the M10

Switching On/Rebooting/Switching Off the M10

To start using the M10 for the first time, install with the SIM card and fully charged it.
Switch the M10 on: Hold down the Power key on the right side of the terminal until the Android logo is displayed. Note that
the initialization is going to take some time before the M10 displays the Home screen.
Reboot the M10: Hold down the Power key on the right side of the terminal until the window below pops up, then tap
"Restart".
Switch the M10 off: Hold down the Power key on the right side of the terminal until the window below pops up, then tap
"Power off".
9

Chapter 3 Basics