Advertisement
Instructions for Installation
4. Open hood; using a flat head
screwdriver, remove the 6 plastic
push pins from the top of the grille.
7. Lay the grille down on a protected surface (cardboard)
with the interior facing up. Using a phillips screw driver,
remove the 4 screws and 2 plastic clips, and remove the
middle section of the grille.
9. Position the grille back into place using 6 new
push pins provided.
5. Pull grille forward and downward
to unhinge the snaps along the
bottom.
10. Close and latch hood shut, insert key, turn to the left to lock the
hood, and remove your key.
6. Line up the mounting holes in JL hood
lock with existing holes on the vehicle
frame - Using the rivet gun install the 4
rivets in place - start with the 2 front holes
as shown.
8. Position the new grille insert in place and secure using the
same 4 screws and 2 plastic clips.
3
4
rd and
th (no preference)
1
Rivet
st
2
Rivet
nd
4737932AA
Advertisement
