Advertisement
Quick Links
FOR SPANISH AND FRENCH TRANSLATIONS GO TO:
HTTP://WWW.BOLTLOCK.COM/ABOUT-STRATTEC/BOLT-LITERATURE
JL Hood Lock
Code lock cylinder before
installing JL Hood Lock in Jeep
Instructions for coding lock cylinder
1. Read and remove warning sticker
- Remove key from key chain
- Keep hand/fingers away from
pivoting lever while coding
JL Grille Insert
Locked
2. Do not pull up/down on key
while coding
While maintaining full key insertion,
turn the key clockwise until it stops
- the lock is now coded to your key!
JL HOOD LOCK KIT
Phillips Head
Screwdriver
Flathead
Screwdriver
6X
Plastic
Push Pins
3. Remove key the lock is now in the
unlocked position - keep lock in this state
during installation.
Rivet Gun
4X
1/4" Rivets
Unlocked
4737932AA
Advertisement
Summary of Contents for Bolt JL HOOD
- Page 1 HTTP://WWW.BOLTLOCK.COM/ABOUT-STRATTEC/BOLT-LITERATURE Phillips Head Flathead Rivet Gun Screwdriver Screwdriver JL Hood Lock Code lock cylinder before installing JL Hood Lock in Jeep Plastic JL Grille Insert 1/4” Rivets Push Pins Instructions for coding lock cylinder Locked Unlocked 2. Do not pull up/down on key 1.
- Page 2 (no preference) Rivet Rivet 4. Open hood; using a flat head 6. Line up the mounting holes in JL hood 5. Pull grille forward and downward screwdriver, remove the 6 plastic to unhinge the snaps along the lock with existing holes on the vehicle push pins from the top of the grille.