Maintenance - Vermeiren Ina User Manual

Ina bathroom bar
1 Upon delivery
Unpack your product and verify if the delivery
is complete. Following items should be
included:
•
1 bathroom bar
•
6 screws
•
6 wall plugs
•
2 rubbers
•
Manual
Verify your product for transport damage. If
you find any damages after delivery, contact
the transporter.
2 Mounting the bathroom bar
CAUTION
• Make sure that the bathroom bar is
mounted securely to the wall. Check the
fixation on a regular basis.
• Be sure that there are no electrical cables
or other tubes in the mounting area of the
bathroom bar.
• The plugs delivered with the product are
suitable for concrete walls or full brick
walls. For other types of walls, please
inquire about the correct type of mounting
equipment.
The bars are designed as general support
elements. They are useable everywhere,
including humid environments. Use the
installation materials which are delivered with
Ina.
To install Ina:
1. Put the bathroom bar in the desired
position.
2. Mark the fixation holes on the wall.
3. Drill holes in the wall.
4. Mount the plugs.
5. Mount the rubber
gaskets.
6. Place the bathroom bar against the wall.
7. Place the screws and fasten firmly.
Risk of injuries
If you have any doubts, do not hesitate to
contact a professional to install the Ina for you.
3 Using the bathroom bar
CAUTION
• Be careful when using in extreme hot or
cold environments (sunshine, extreme
cold, saunas, etc.).
• If you notice any defects, refrain from using
Ina.
The maximum pulling weight for the bathroom
bar is 120 kg.

4 Maintenance

Ina can be cleaned and disinfected with
normal household products. Avoid using
abrasive cleaning products that can cause
discoloration.
The high quality of the surface layer
guarantees optimal
corrosion. If the outer coat is damaged by
scratching or in some other way, get your
specialist dealer to repair the affected surface.
4.1 Expected lifespan
The bathroom bar is designed to have an
average lifespan of 5 years.
5 Technical specifications
Brand
Type
Model
Description
Maximum load
Distance bar-wall
Minimum mounting area
Storage temperature
We reserve the right to introduce technical changes.
Measurement tolerance +/- 15 mm / 1,5 kg / 1,5°.
1
2020-06
Risk of burns
protection against
Vermeiren
Bathroom bar
Ina
Dimensions
120 kg
65 mm
30 cm: 70 x 376 mm
40 cm: 70 x 476 mm
50 cm: 70 x 576 mm
60 cm: 70 x 676 mm
+5°C - +41°C
EN
Ina
NL