Using The E-Scope; General Clinical Use; For Teaching; Recording - Cardionics E-Scope II Operator's Manual

Cable Connections
Cat. no. Description
711-9000 Interface Cable. Connects to a PC or recording device that
th
accepts an 1/8 inch phone plug.

2.0 Using the E-Scope

2.1 To use the E-Scope, place the stethoscope on the patient in the
normal manner as shown in Figure 4. Press any button on the head
of the stethoscope to turn it ON. Press and hold the + button until the
volume is at a desired level. The filter is automatically set for heart
sounds. If you wish to change it to breath sounds, press the ● button
on the stethoscope head (Note: If the ● button is pressed to activate
the E-Scope then the filter will be in the breath mode).
The E-Scope will turn OFF automatically after 1.5 to 2 minutes. To
restart, press any button on the stethoscope head. The E-Scope
retains the last volume setting and reverts to that setting when
restarted.

2.2 For Teaching

For teaching purposes, it is possible to have a second person listen to
a patient simultaneously. Connect the stethophone (cat. no. 718-
0500) to the "sounds output" of the E-Scope. The student will hear
what the instructor hears.
2.3 Recording Sounds
We suggest you also review Appendix A in this manual for recording
techniques.
To record you will need a connecting cable (cat. no. 711-7128).
8