Using Rinse And Spin; Using Drain And Spin - Whirlpool 3396315 Use And Care Manual

Soak cycle
The Soak cycle features brief periods of agi-
tation and soak time to help remove heavy
soils and stains that need pretreatment.
l
Use warm water when soaking laundry.
(Hot water can set stains.) See pages
22-24 for stain removal information.
l
Use the amount of detergent or presoak
additive recommended by manufacturer.
l
After the 12-minute Soak cycle ends, add
detergent and set a new wash cycle.
Super Wash cycle
The Super Wash cycle automatically pre-
washes the laundry and advances into the
Regular wash cycle. (The washer does not
need to be reset after the Super Wash
cycle.) Use this 14-minute cycle when
washing heavily-soiled loads that need
maximum soil removal.
0 For proper cleaning, use double the
amount of detergent recommended for a
wash cycle.
NQTE:
The washer pauses between the
Super Wash cycle and the Heavy part of the
Regular wash cycle. This is normal.
Using rinse and spin
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may want an extra rinse and spin.
1. Push in Cycle Control Knob and turn
clockwise to Rinse, as illustrated.
2. Pull out Cycle Control Knob. The washer
fills to selected load size, agitates, drains,
and spins.
Using drain and spin
A drain and spin may help shorten drying
times for some heavy fabrics or special-care
items by removing excess water.
1. Push in Cycle Control Knob and turn
clockwise to Spin, as illustrated.
2. Pull out Cycle Control Knob. The washer
drains and then spins.
11