Table of Contents
Advertisement
Selecting a cycle and time
This section illustrates and describes the
wash cycles you can select with the Cycle
Control Knob. Use this information to help
you make the best cycle selections for your
wash loads. Each cycle is designed for
different types of fabrics and soil levels.
Normal cycle
The Normal cycle features high agitation
and spin speeds to shorten drying time.
Use this cycle for cleaning cotton and linen
fabrics. Select 6, 10, or 14 minutes of wash
time, depending on whether your load is
lightly, moderately, or heavily soiled.
Permanent Press cycle
The Permanent Press cycle features a cool-
down rinse and low spin speeds to reduce
wrinkling. Use this cycle for cleaning perma-
nent press and some synthetic fabrics.
Select 10 or 8 minutes of wash time, de-
pending on whether your wash load is
moderately or lightly soiled.
NOTE: The 8-minute Permanent Press
cycle is indicated on your control panel with
a dot only, directly below the 10-minute
cycle.
O PERATIN G YO UR WASHER
NORMAL
LIGHT
6
REGULAR
10
HEAVY
14
OFF
DELICATES
8
OFF
PULL START • PUSH STOP
PULL START • PUSH STOP
•
The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
•
Refer to page 8 to learn more about the
sounds you may hear during a wash cycle.
•
Also, refer to page 9 to help you under-
stand what happens during a wash cycle.
OFF
10
PERMANENT
PRESS
COOL
DOWN
(PAUSE)
Delicates cycle
The Delicates cycle features a reduced
agitation speed for gentle soil removal.
Low spin speeds reduce wrinkling. Use
this 8-minute cycle for cleaning lightly to
moderately soiled delicate items and
washable knits.
continued on next page
7
Advertisement
Table of Contents
