Step Two: How Do I Set It; How To Reset The Camera And Format The Sd Card; Menu Setting List - Victure HC200 Manual

STEP TWO: HOW DO I SET IT?

1. Slide the Switch Button to the【TEST】position. The screen will light up.
2. Press the MENU button and enter the setting interface. Here, you could press the UP and
DOWN arrow to change the option, then press the OK button to confirm selection or press the
MENU button to return to the last interface. (Under the TEST mode, you could also press the
SHOT button to take photos or videos manually.)
>How To Reset the Camera and Format the SD Card?
Slide the switch button to the【TEST】position, then the screen gets bright. Press the【MENU】
button and then press the【UP】and【DOWN】button to find the place to format the SD card and
say yes to reset settings.
>Menu Setting List:
>Mode: The camera will only take photos under Photo mode, only take videos under Video mode,
and the photo first and then the video under the Photo+Video mode. Please set the function by
you need.
>Photo Size: The maximum value is 16MP and the default value is 5MP. Higher resolution
provides clearer images, but creates larger files that takes up more of the SD card capacity.
>Video Size: The maximum and default value is 1080P. Higher resolutions produces better quality
videos, but creates larger files that takes up more of the SD card capacity.
>Picture No.: Choose 1 photo, and the camera will take one photo once; Choose 2 photos in
series will get two photos once, choose 3 photos in series will get 3 photos once. Please set the
Caution:
1.Format the SD card and reset the
camera to defaults when the first use
or used for a while.
2.If your SD card has been used for a
while and you would like to format it,
please make sure that you have
archived the files you need before
proceeding this.
3