Step One: What Should I Prepare Before Using; Preparation Before Using; Install The Batteries; Insert The Sd Card - Victure HC200 Manual

STEP ONE: WHAT SHOULD I PREPARE BEFORE USING?

>Preparation before Using
1. The SD card, the batteries and the external power supply are not included in the package, you
need to prepare these things beforehand.
2. Tips and Recommendation:
(1) The camera has a power supply of 4x or 8x LR6 batteries (AA), 4x or 8x NiMH batteries LR66
(AA) with low self-discharge; The camera's voltage is 6V, so 4 batteries can make the camera work,
but using eight batteries can increase the camera's working time.
(2) For optimal performance, we recommend using a full set of eight rechargeable batteries of
high-quality to maintain maximum battery life. The recommended brands of batteries are
Energizer® or Duracell® branded batteries.
(3) External power supply output: 6V/1.5A; DC-IN plug size: 3.5 mm*1.35 mm/1.3 mm.
(4) Our cameras can support class 6 or faster SD card ranging from 4GB to 32GB. The
recommended brands of SD cards are Sandisk® or Kingston® branded card. Please use the
standard card instead of the TF or Mirco card.
>Install the Batteries
1. Opening the battery cover at the right side of the camera.
2. Make sure you install the batteries with the correct polarity, following the following picture.
>Insert the SD Card
1. Turning off the read-write protection of the SD card, which located in the left of the card, so
that the camera can recognize the card.
1