Download Print this page

Sealey IWMH2003RC.V2 Instructions page 2

Infrared quartz heater wall mounting with remote control

Advertisement

IMPORTANT! This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the
appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
2. INTRODUCTION
A totally dry heat, no condensation, no gas, no fumes and no smell. Reaches maximum heat output within seconds of being turned on. Highly polished
aluminium reflector for maximum heat efficiency. Adjusts horizontally through 25° while mounted. Three settings, controlled by push on/off switch or
remote control, allowing unit to be on full, half or low power. Ideal for industrial or domestic applications. Suitable for indoor and outdoor use, if weather
protected.
3. SPECIFICATION
Power: . . . . . . . . . . . . . . . . . . . 2000W
Input supply: . . . . . . . . . . . . . . . 230V 50Hz 13A
Dimensions (W x H x D): . . . . . 485 x 250 x 170mm
© Jack Sealey Limited
Original Language Version
fig.1
IWMH2003RC.V2
Issue:3(MB) - 09/12/15

Advertisement

loading