Operation - iComfort ic6600 Instruction Manual

8. OPERATION

We recommend adjusting the chair angle before powering up the chair. This way, the body
measurements done automatically by the massage chair will be done correctly.
Back section up and down adjustments
Press this button
Press this button
Then, press on the power On/Off button
The ic6600 will scan the length of your back. Once done, the automatic massage mode will start. You
can choose another automatic massage mode. There are three automatic massage modes. You can
interrupt the automatic massage mode at any point by shutting off the unit. The massage chair will
then return to its original position.
If you prefer to use the manual massage mode, you can choose the type of massage you want (Shiatsu,
knead, tap, etc.). The massage chair will then use the massage mode you have chosen.
on the power
position and shut off.
Automatic massage modes
A. Press on the 'adjust shoulder' buttons
to your preference.
B. Press on one the Automatic massage mode button of your choice.
Memory mode
M1) During an automatic massage, the first press of the on/off
massage function and the remote control displays "memory", you can choose any of the two
Memory buttons
to lower the back and raise the leg and foot section.
to lower the leg and foot section and raise the back.
button again at any time and the massage chair will come back to its original
on the remote control
to adjust the massage chair course length
to remember the massage and the position. You
to activate the massage chair.
You can press
button deactivates the