Table of Contents
Advertisement
ROSS
MN/13070
5.7
Edit Modem Configuration File
The SA sets the modem parameters by calling a preconfigured file and streaming it over the local
LAN connection. This file is edited through a user interface that is provided by a shared library.
The library file is loaded by the RCE to display all the configuration values that require setting
for this SA.
The library must be named ParamEdit.dll and be visible in the RCE path. It is recommended that the
ParamEdit.dll reside in the same working directory as the RCE executable. Contact Comtech EF Data
technical support at
supportcvni@comtechefdata.com
to obtain the latest ParamEdit.dll library.
See Vipersat CDM-570/570L Users Guide, Doc 22125, Rev2, FW Ver.1.6.5 for proper operation.
After selecting the Modem Config (Ctrl+M) from the Edit dropdown menu the RCE will invoke
the CDM editor popping the dialog display menu into view. Configure all the modem
communication parameters that are appropriate for this SA.
Comtech EF Data, Vipersat Products
Page 55 of 87
Advertisement
Table of Contents
