Table of Contents
Advertisement
ROSS
4.4
Main Menu
After using one of the connection methods the top main menu will display configuration, Status,
Operations and About selections. Each selection has submenus which provide additional
configuration settings or system information. The menu using Putty allows left mouse button
selection or keyboard character shortcuts with keypad arrow manipulation. All settings require
positive acknowledgements before they are stored into nonvolatile memory. The shortcut keys
are represented by an underlined character on each displayed menu.
This section is a step-by-step procedure configuring all the necessary communication parameters
for ROSS to gain access control to system components e.g. network, modem and ACU. These
settings are typically configured once during installation deployment and remain static unless
network configuration change.
4.5
Configuration Menu
Select Configuration to access the configuration menu. The configuration menu has specific
communication parameters that ROSS will use to query and control. The base menu bar sets
storage parameter controls as illustrated below:
4.6
ACU Configuration
Every ACU vendor has their own proprietary communication protocols that provide for external
devices to gain access to monitor and control settings. Selecting ACU Type allows the operator
to enter the appropriate model or manufacture indicating to the ROSS which device driver to
initialize during boot-up. The ACU models supported by ROSS are listed in Appendices at end
of this document. The ACU Configuration dialog allows the operator to sets the ACU type and
configuration options.
See the Appendices for ACU specific configuration parameters.
Comtech EF Data, Vipersat Products
MN/13070
Page 31 of 87
Advertisement
Table of Contents
