StowAway 2 025.41 Assembly Instructions

Rod Holder #025.41 Assembly Instructions
r0509
This assembly includes 3 tubes, mounting brackets and hard-
ware. This assembly can be purchased separately or as part of
Rod Rack #025.4
the StowAway
Please review the instructions and warranty carefully
before assembling the unit
Assembly and installation of the cargo rack are the end user's responsibility and beyond Pacific Recreational
Product's control. PRP limits its warranty to the repair or re-
placement of a defective product for up to five years from re-
tail purchase. Damage to your vehicle, cargo, or to any person
or property is excluded.
Each Rod Holder Assembly Carton Contains—(see below)
1. 3 - Anodized Aluminum Rod Tubes
2. 2 - Rod Holder Brackets— "A" is the outside bracket, "B"
is the inside bracket (inside the rack rail)
3. 6 - Bolts
4. 6 - Round washers
5. 6 - Nuts
6. 3 - Oval, radiused washers, two holes in each

Tools Required

• Phillips screwdriver
• 7/16" socket or wrench
Note: Hardware quantities may not match hardware list above.
Pacific Recreational Products, Inc.
B B B B
A A A A
1