Installation Requirements; Tools And Parts; Location Requirements - Whirlpool NTW5100TQ Installation Instructions Manual

INsTaLLaTION reQUIreMeNTs

TOOLS AND PARTS

Gather the required tools and parts before starting installation.
Tools needed:
Adjustable or open end
wrench / " (14 mm)
9
16
4" min
(102 mm)
Wood block
Pliers that open to 1 ⁄ "
9
16
(39.5 mm)
Optional tools:
Flashlight
Parts supplied:
NOTE: All parts supplied for installation are in
washer basket.
Beaded Tie Strap
Drain hose form
2
Level
Ruler or measuring tape
Bucket
Front leveling feet with
jam nuts (2)
Parts needed:
(Not supplied with washer)
Inlet hoses with flat washers
To order, please refer to toll-free phone numbers on front page
of your Washer User Instructions.
8212656RP 10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack)
n
8212641RP 5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack)
n
8212646RP 4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack)
n
8212545RP 5 ft. (1.5 m) Inlet hose, Red and Blue EPDM
n
(2 pack)
8212487RP 5 ft. (1.5 m) Nylon braided inlet hose (2 pack)
n
8212638RP 6 ft. (1.8 m) Nylon braided inlet hose, space
n
saving 90° elbow, hypro-blue steel couplings
(2 pack)
8212637RP 6 ft. (1.8 m) Inlet hose, Black EPDM, space
n
saving 90° elbow, hypro-blue steel couplings
(2 pack)
Alternate parts:
(Not supplied with washer)
Your installation may require additional parts. To order, please
refer to toll-free numbers on front page of your Washer User
Instructions.
If you have:
Overhead sewer
Drain hose too short
Lint clogged drain

LOCaTION reQUIreMeNTs

Select proper location for your washer to improve performance and
minimize noise and possible "washer walk". Install your washer in
a basement, laundry room, closet or recessed area.
27"
(686 mm)
42"
(1067 mm)
You will need:
Standard 20 gal. (76 L) 39"
(991 mm) tall drain tub or utility
sink, sump pump and connectors
(available from local suppliers)
Kit Part Number 280131
Drain protector,
Part Number 367031
25 / "
1
2
(648 mm)