Subscribe to Our Youtube Channel
Summary of Contents for Amiccom Y12
- Page 1 Indoor WiFi Camera Support Telephone:+1(877)877-1984 Support Email:support@amiccom.net After-sales website:http://amiccomcam.com...
- Page 2 IP Camera User Manual support@amiccom.net http://amiccomcam.com/ Before using this product, please read the guide carefully to avoid any damages to the product, do not misconfiguration or misuse. Camera Adapter USB cable User manual *Pictures are only for reference. IR cut...
- Page 4 (1)Make sure you have connected power well. (4)Wifi cannot be 5G,it only supports 2.4G. (6)Please complete the pairing first, then put the sd card into the camera. (7)Check the camera is in pairing model:The LED indicator should be flashing .Then send sound wave.
- Page 11 (3)Format your SD card to Fat32 or exFat32 format. (4)The SD card is on the top of the camera.
- Page 12 Jawa...
- Page 18 4.9 REMOTE CONTROL YOUR CAMERA BY APP Enter the live video interface of APP, using the direction arrows(up/down/right/left) to control the camera to rotate vertically/horizontally.
- Page 20 1. Cannot bind camera device? In the location where the camera is installed, there must be a full WiFi signal.You can put your mobile phone in the location of the camera to test whether there is a full WiFi signal . (1)After sending the sound wave, the camera has no beep sound.
- Page 21 (3)After sending the sound wave, the camera has a prompt sound “Wireless network is established”,but no successful binding.Please check: A.Ensure that your router has the access to the network; B.Check to see if your router has any limitations restricting it from accepting network requests;...
- Page 22 4. The camera’ s video screen is corrupted (1) If the video is corrupted when watching live video, A. log out of the APP and log in again, then refresh the phone screen to watch; B. remove the camera from the APP and adjust the installation position of the camera to avoid direct sunlight.
- Page 23 6. Sound is not coming from app on phone? Please make sure your phone is not on silent and the volume is turned up. Make sure the sound peimission is allowed.Refer pic 26,27&28. PIC26 PIC27 PIC28 7. Can more than one person view my camera Yes, up to 15 users can view a single camera.
- Page 24 9. I have forgotten my password (1) Log out the app,click the icon below,so that you can see your password. (2) Or you can try: A. Log out and click "Forgot password". B. enter your email and click next. C. click send code, and input the code to reset the password. 10.Camera offline? You can check LED lights don't work...
- Page 25 If you have any other questions, please check our after-sales website. After-sales website:http://amiccomcam.com If it still can't solve your problem, please feel free to contact us. E-mail:support@amiccom.net Support Telephone:+1(877)877-1984...
- Page 27 Please install the camera near the router. Please ensure that the WiFi signal is full at the position where the camera is installed. Full Wifi Signal Camera Router...
Need help?
Do you have a question about the Y12 and is the answer not in the manual?
Questions and answers