(Wi-Fi) With Wps Function; Connecting The Appliance To A Wlan Home Network (Wi-Fi) Without Wps Func- Tion - Bosch WAV28MH3GB User Manual And Installation Instructions

en Home Connect
Press the WPS button on the
3.
router within the next 2 minutes.
Take note of the information in the
documents for your router.
flashes in the display.
a
a The appliance attempts to connect
to your WLAN home network.
a If the display shows con and
lights up permanently, the appli-
ance is connected to the home
network.
If the display shows Err , the appli-
4.
ance is not connected to the home
network.
Check whether your appliance is
‒
in range of your home network.
Reconnect the appliance to the
‒
WLAN home network (Wi-Fi)
with WPS function.
Connect your appliance to the
5.
Home Connect app. → Page 43
15.3 Connecting the appli-
ance to a WLAN home
network (Wi-Fi) without
WPS function
If your router does not have a WPS
function, you can connect the appli-
ance to your WLAN home network
(Wi-Fi) manually. The appliance
quickly sets up its own Wi-Fi network.
You can connect a mobile device to
the WLAN network and transfer the
42
network information for the WLAN
home network (Wi-Fi) to your appli-
ance.
Requirement: The Home Connect
app is open and you have logged on.
Press and hold Remote Start
1.
at least 3 seconds.
a The display shows Aut.
Set the programme to position 2.
2.
a The display shows SAP .
Press Start/Reload
3.
flashes in the display.
a
a The appliance now sets up its own
Wi-Fi network with the name (SSID)
HomeConnect.
Call up the Wi-Fi settings on the
4.
mobile device.
Connect the mobile device to the
Home Connect Wi-Fi network and
enter the password (key) Home-
Connect.
a Your mobile device now connects
to the appliance. The connection
process may take up to
60 seconds.
for
.