Table of Contents
Advertisement
a The display shows
a The controls are locked.
a The childproof lock remains active
even after the appliance has been
switched off.
14.2 Deactivating the child-
proof lock
Requirement: To deactivate the
childproof lock, the appliance must
be switched on.
Press and hold the two Child Lock
▶
push 3 sec. buttons for approx.
3 seconds.
So that the programme currently
running is not cancelled, the pro-
gramme selector must be set to
the initial programme.
goes out in the display.
a
Home Connect
15 Home Connect
This appliance is network-capable.
Home Connect
Connecting your appliance to a mo-
bile device lets you control its func-
tions via the Home Connect app, ad-
just its basic settings and monitor its
operating status.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
¡ → "Connecting the appliance to a
WLAN home network (Wi-Fi) with
WPS function", Page 41
¡ → "Connecting the appliance to a
WLAN home network (Wi-Fi)
without WPS function", Page 42
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
.
Tips
¡ Please consult the documents sup-
plied by Home Connect.
¡ Please also follow the instructions
in the Home Connect app.
Notes
¡ Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→ "Safety", Page 4
¡ Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
15.1 Home Connect settings
Adapt Home Connect to your needs.
You can find the Home Connect set-
tings in the basic settings for your ap-
pliance. Which settings the display
shows will depend on whether
Home Connect has been set up and
whether the appliance is connected
to your home network.
15.2 Connecting the appli-
ance to a WLAN home
network (Wi-Fi) with
WPS function
Using your router's WPS function is
the simplest way to connect the ap-
pliance to your home network.
Requirement: If your router has a
WPS function, you can connect the
appliance to your WLAN home net-
work (Wi-Fi) automatically.
Press and hold Remote Start
1.
approx. 3 seconds.
a The display shows Aut.
Press Start/Reload
2.
Home Connect en
.
for
41
Advertisement
Table of Contents
