PowerVision PowerDolphin User Manual page 11

Hide thumbs Also See for PowerDolphin:
Table of Contents

Advertisement

After removing and using the microSD card, remember to secure the rubber plug into
place before the next sailing.
• Payload System
PowerDolphin has a payload system at its tail, which can tie things with a rope and release
them in the specified location.
1. Fasten the rope to the payload system.
2. Press and hold the Custom button on the remote controller or touch the Unhook/Bait
button in the App to execute the unhook operation.
3. Unhook operation done: Short press the custom button on the remote controller or
touch the Unhook/Bait button in the App to resume the hook to its initial position.
• Sailing Mode
• Underwater Mode: The maximum speed is limited so the electric joint camera can be
adjusted for different angles to offer multiple views. These functions are suitable for
low-speed, underwater scenarios.
• Normal Mode: The maximum speed is unlimited. The electric joint camera is set to its
initial position and cannot be adjusted. This function is suitable for high-speed enjoy-
ment and water-surface FPV scenarios.
• Cruise Mode: The cruise control function allows for unlimited maximum speed. The
electric joint camera is set to its initial position and cannot be adjusted.
1. To enter Cruise mode: Hold the throttle stick in a position for 2 seconds and then
release.
Device connected
Or
5m
m
m m/s
m/s
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PowerDolphin and is the answer not in the manual?

Table of Contents

Save PDF