First Time Use; Menu List; General Operating Principle; Quick Start - Kane 258 Manual

FIRST TIME USE

Charge your KANE258's batteries for 8 hours - An overnight charge
should be sufficient for an average 8-hour day.
Take time to read this manual fully & be aware your analyser's
configuration may not support all features explained in this manual.
Take time to set it up to your requirements before using your analyser.
NOTE: Your analyser's STATUS bar displays current time, date &
battery status - Check time & date are correct as they can only be
changed when you have no stored logs in Memory to protect the
integrity of your stored data.

GENERAL OPERATING PRINCIPLE

Using your KANE258 is simple with the rotary dial & user interface. Most
tests can be made with little user activity.
Your analyser's status bar offers options based on tasks you are
performing & displays useful information & messages.

QUICK START

Turn on your KANE258 pressing the button for 2 seconds until it
starts. Your KANE258 starts a 30 second zero calibration - once
completed select the tests you want by turning the analyser's rotary dial.

USER INTERFACE

Your KANE258's large display shows 5 lines of tests & a status bar. The
backlight activates on each button press then turns off after 10 seconds.
Navigate through your options & menu choices via the 3 dedicated
& buttons.
Button presses are either short or long presses.
KANE 258 MANUAL 11