7.6
Links
The DALI participants created via the allocation function can now be linked with sensors.
The link is made via the device function of the Web-based user interface of the
System Access Point.
7.6.1
Linking actuator and sensor
Fig. 16:
Linking actuator and sensor
1. To connect an actuator with a sensor, first click on the desired sensor [1], which is to
operate the actuator, and then on the actuator [2].
2. Press the tick at the bottom right to take over the entry.
–
A blue connecting line indicates the link between the two devices. The configuration is
now transmitted automatically to the devices. The transmission can (depending on the
number of affected devices) take a number of seconds. During the transmission a
progress bar is displayed around the devices affected.
Product manual 9AKK107680A3586
Commissioning
│29