Table of Contents
Advertisement
7.3
Allocation of devices and definition of channels
The devices connected to the system must be identified, i.e. they are allocated to a room
according to their function and are given a practical name.
The allocation is made via the "Devices" allocation function of the Web-based
user interface of the System Access Point.
7.3.1
Add device
Fig. 6:
Selecting the device group
1. Select the desired device group in the "Add devices" bar.
Notice
Ensure that the correct filter is set, so that the correct device group is displayed.
Notice
The DALI Gateway, REG does not appear in the view; instead, the up to 16
connected DALI participants (ballasts) are displayed. These can then be added
to the floor plan.
Product manual 9AKK107680A3586
Commissioning
│20
Advertisement
Table of Contents
