How To Toggle Between An E-Manual Topic And The Corresponding Osd Menu(S); How To Search For A Topic On The Index Page; Initial Setup - Samsung 4 Series User Manual

How to toggle between an e-Manual topic and the corresponding OSD menu(s).

- This function is not enabled in some menus.
- You cannot use the Try Now function if the menu is not activated.
1. If you want to use the menu that corresponds to an
e-Manual topic, press the red button to select Try Now.
2. To return to the e-Manual screen, press the E-MANUAL
button.

How to search for a topic on the index page

- This function may not be supported depending on the language.
1. If you want to search a keyword, press the blue button to select Index.
2. Press the ◄ or ► button to select a character order you want.
3. Press the ▲ or ▼ button to select a keyword you want to see, and then press the ENTERE button.
4. You can view the corresponding e-Manual instruction screen.
- To close the Index screen, press the RETURN button.

Initial Setup

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Setup is available only when the source is set to TV.
If You Want to Reset This Feature...
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0".
If you want to change the PIN number, use the Change PIN function.
You should do Setup (MENU → System) again at home even though you did in shop already.
- If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the
PIN to "0-0-0-0": MUTE → 8 → 2 → 4 → POWER (on)
UK4005_5005_ZK_BN68-07832K-00.indb 8
Method 1
English - 8
Method 2
1. Press the ENTERE button when a topic is displayed.
"Are you sure?" appears. Select Yes, and then press the
ENTERE button. The OSD window appears.
2. To return to the e-Manual screen, press the E-MANUAL
button.
2016-05-25 오후 5:55:52