Panasonic CF-VDM Series Operating Instructions Manual page 20

Using the Software
Running B's Recorder / B's CLiP
B's Recorder
You can run B's Recorder using either of the following procedures.
Double-click
desktop.
Click [start] - [All Programs] - [B.H.A] - [B's Recorder GOLD8 BASIC] - [B's
Recorder GOLD8] (B's Recorder main window) / [TaskGate] (launcher window).
B's CLiP
You can use B's CLiP when
E
: No disc is inserted or the inserted disc is not formatted using B's CLiP.
: The inserted disc has been formatted using B's CLiP.
: The drive is not connected.
Usage Precautions
B's Recorder
Be sure to shut down B's Recorder before you log off Windows.
Otherwise B's Recorder may not start normally when you log on to Windows next
time. In this case, restart the computer.
B's CLiP
B's CLiP is not compatible with fast user switching (the
from the notification area). If you want to continue using B's CLiP after switching
users, log off all users, and then relog on to Windows.
Do not remove the media immediately after reading or writing, or just after the Win-
dows reading/writing message disappears.
When
automatically.
Do not add the check mark for [Enable CD recording on this drive] in [Properties] -
[Recording] of the CD/DVD drive, otherwise you cannot write to the disc using B's CLiP.
You can format DVD-RW discs in UDF1.5/UDF2.0/UDF2.01 format on this com-
puter. However, you cannot use the discs on DVD recorders.
20
(B's Recorder main window) /
is displayed on the notification area, the computer will not enter standby
or is displayed on the notification area.
(launcher window) on the
and icons disappear