Table of Contents
Advertisement
!
I I
Other operating instructions
For a rinse and spin
For a drain and spin
You may need on extra rinse and
spin for heavily soiled loads which
need more detergent. (Extra detergent
con require on extra rinse.)
1.
Push Control Knob in.
2. Turn clockwise to any
l
on the dial.
See above
drawing.
3. Pull Control Knob out. The washer
will fill to selected level; agitate 2
minutes; drain and spin.
Your washer con be set to drain and
spin out wafer.
1.
Push Control Knob in.
2. Turn clockwise to the bar just before
the OFF area in any cycle. See
above
drawing.
3. Pull Control Knob out. The washer
will drain and spin.
For agitation
and spin speeds
in each
cycle,
see pages
6-11.
For a soak
1.
Use recommended
amount of
detergent or presoak product.
2. Push Control Knob in.
3. Turn clockwise to point to the
number
in the SOAK Cycle.
4. Pull Control Knob out. The
washer will start.
For best results, use
warm
water
for soaking or pre-washing
stained
laundry.
Hot water
can set StainS.
5. When the cycle is over, add
detergent for the next selected
wash cycle.
The SOAK Cycle
should
always
be followed
by
a Wash Cycle.
important:
See additional
care
Information
In your "Laundry
Guide!'
'To start soak with agitation, the Control Knob
must point to Q number in the SOAK Cycle.
12
Advertisement
Table of Contents
