Cambro CVC75 Owner's Manual page 2

I. Display Case and Extender Installation
Step 1
Remove the 4 fasteners
then remove the
Center Cap.
Step 3
2
Place the dowels in the
main shelf and each
spacer as indicated here.
Orient each spacer
as seen here and
place them in a stack
of two.
Position the clear panels
in the groove on the main shelf
and in the vertical slots of
the raisers and corner supports
Locate the CVC75DCR60
and CVC75DCR675 onto the
Locate the center raisers onto the
main shelf using the round
main shelf using the round raised
raised rim on the bottom of
rim on the bottom of each raiser. each raiser.
Insert 4 each 15-7/8" long
Insert 4 each threaded rods,
threaded rods, 3/4" into the
3/4" into the Center Cap.
Center Cap.
Step 1
One for the 6" models,
two for the 12" models
Step 3
Locate the H-shape
panel joiner between
the clear panels.
Step 2
Step 4
Step 4