Download Print this page

Incite Fire Sigma CP Quick Reference Manual

Conventional fire control panel
Hide thumbs Also See for Sigma CP:

Advertisement

Quick Links

Sigma CP
Conventional
Fire Control Panel
Quick Reference Guide
Australia Version 1

Advertisement

loading

Summary of Contents for Incite Fire Sigma CP

  • Page 1 Sigma CP Conventional Fire Control Panel Quick Reference Guide Australia Version 1...
  • Page 2 How To Do This Display Comments Alarm/Fault Silence buzzer Buzzer will resound on next Buzzer Silenced event. Alarm/Fault Buzzer Silenced Press button Lamp Test lamps Buzzer sounds whilst button Test is pressed All lamps on Press button Enable Control Enable buttons Buzzer beeps twice every few seconds Turn key...
  • Page 3 How To Do This Display Comments Put a zone into test Mode mode. Step 1 Press button until t1 is First display displayed Put a zone into test Select mode. Zone 5 for example Step 2 Press button to scroll Zone 5 zones Put a zone into test...
  • Page 4 How To Do This Display Comments Enable sounders Mode Step 1 Press button until db is displayed Enable sounders Dot extinguishes to indicate Enter Step 2 bells/sounders are enabled. General disablement and sounder Fault/Disablement Press button indicators extinguish. Activate zone input Mode delays Step 1...
  • Page 5 Notes to Technicians and Testers. This incite Sigma and Syncro range of panels have been designed to meet AS7240.2 and AS7240.4 These standards are very different in both their panel operation and operating parameters from the old Australian standards, AS4428.1 and AS1603.4. The main differences are outlined here as follows;...
  • Page 6 When the delay is activated and an alarm occurs, the output will not operate until this delay period has expired. Refer to the Sigma CP Operation and Maintenance Manual, Table 8 for configuration options. Earth Fault: An AS7240 panel will detect if there is an earth fault on the system...
  • Page 8 Sydney Block Y, Unit 1, 391 Park Road, REGENTS PARK NSW 2143 Mail: PO Box 508 GYMEA NSW 2227 Phone: 1300 INCITE (1300 462 483) | 02 9644 7144 Fax: 02 9644 7255 Email: sales@incitefire.com.au Technical support: support@incitefire.com.au Melbourne Address: Unit 120, 45 Gilby Road, MT WAVERLEY VIC 3149 Phone: 03 9544 2211 Fax: 03 9544 2212 Email: salesvic@incitefire.com.au...