Download Print this page
Montigo RFKFID Manual
Montigo RFKFID Manual

Montigo RFKFID Manual

Optional fan kit

Advertisement

Quick Links

Installing the RFKFID High Output Fan Kit or
CAUTION
Ensure that all power to the appliance is off at the electrical breaker or fuse
before beginning installation. Ensure gas is turned off at the shutoff valve before
beginning installation.
General Information
This blower kit is for installation with the models listed above.
KIT #
Contents
RFKFID
Left High Output fan, Right High Output fan, mount-
flue plate gasket, 30FID flue plate gasket.
RFKFIDECO
Left Economy fan, Right Economy fan, mounting
flue plate gasket, 30FID flue plate gasket.
Before You Begin
Please read all instructions carefully
We strongly recomment that all electrical service work be
performed by a qualified electrical contractor.
Check to ensure that all components required for installa-
tion are included in your package.
Page 1
RFKFIDECO Economy Fan Kit
®
C
US
ing screws, cable ties, 34FID
screws, cable ties, 34FID
Optional Fans for use with:
30FID-L/S
34FID-L/S
This kit should be installed by a qualified person.
Check local codes and read all instructions prior to
installation.
Some materials used in the manufacturing process of this product can
expose you to Benzene which is known in the State of California to
cause cancer and birth defects or other reproductive harm. For more
information go to www.P65warnings.ca.gov
34FID gasket 30FID gasket
Cable ties and
fan mounting
screws
Figure 1 RFKFID
34FID gasket 30FID gasket
Cable ties and
fan mounting
screws
Figure 2 RFKFIDECO
Optional Fan Kit
WARNING
Left fan
Right fan
Left fan
Right fan
XT0022 - 150629.3

Advertisement

loading
Need help?

Need help?

Do you have a question about the RFKFID and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Montigo RFKFID

  • Page 1 Optional Fan Kit Installing the RFKFID High Output Fan Kit or RFKFIDECO Economy Fan Kit Optional Fans for use with: 30FID-L/S 34FID-L/S This kit should be installed by a qualified person.  ® Check local codes and read all instructions prior to ...
  • Page 2: Installation

    2). Unpack fan kit. The gaskets supplied with the kit are only for fan replacement. Discard if not needed. Both the Figure 4 RFKFID and RFKFIDECO Install the same way. Installa- tion images show high output fans. 5). Remove the four screws highlighted in Figure 5.
  • Page 3 Installation 6). Install fans into the back of the fireplace. 8). Connect the Fan Wire Harness at the back of the appliance. Figure 6 Figure 8 7). Secure each fan using 3 screws (for 30FID) and 2 screws (for 34FID). 9).
  • Page 4 Installation 10). Secure the Wire Harness with the cable ties as shown in figure 10 and 11. Figure 10 Figure 11 11). If desired, it is possible to test the Blower operation with the Gas Supply turned off or disconnected. To test the Blower operation, re-connect the electrical supply temporarily.
  • Page 5 Notes Page 5 XT0022 - 150629.3...
  • Page 6 I-Series Optional Fan Kit RFKFID XT0022 - 150629.3...

This manual is also suitable for:

Rfkfideco